A little help from Stazilix
Find your right fit
Start with your bucket dimensions, the complete model on your litter machine, or the measurements of your litter tray. A similar-looking product does not establish the same fit.
For bedside commode buckets
The liner measures 21 × 15.7 inches when laid flat. Allow enough material to fold over the bucket rim. Place one pad inside one liner for each complete use. The 50-use pack contains 50 liners and 50 pads; the 100-use pack contains 100 of each. Both items are vanilla scented. The commode is not included.
See the commode liner-and-pad kits →
For cat litter machines and trays
Choose the exact listed model where one is provided. For system-level listings, compare the drawer shown and the liner dimensions. Tray liners are a separate, measured choice. Dimensions below describe the liner laid flat, not the machine or drawer.
Refill Bags for Neakasa M1 Plus
Check for Neakasa M1 Plus on the machine label. This family is not presented as a universal Neakasa fit.
Flat liner: 27 × 13 inches
See fit photos & pack choices →Refill Bags for Litter-Robot 3
Match Robot 3 on the machine label. Check the drawer before ordering; Robot 4 and Robot 5 have separate product pages.
Flat liner: 25 × 15.7 inches
See fit photos & pack choices →Refill Bags for Litter-Robot 4
Match Robot 4 on the machine label. These bags are listed for the waste drawer, not for lining the litter bed.
Flat liner: 25 × 15.7 inches
See fit photos & pack choices →Refill Bags for Litter-Robot 5
Match Robot 5 on the machine label and compare the waste drawer. Robot 3 and Robot 4 are separate choices.
Flat liner: 25 × 15.7 inches
See fit photos & pack choices →Refill Bags for Petpivot Autoscooper 11 / 12
Check for Autoscooper 11 or 12 on the Petpivot machine label. Compare the stated liner dimensions and follow your machine's fitting instructions.
Flat liner: 23.62 × 11.81 inches
See fit photos & pack choices →Refill Bags for Meowant MW-SC01 / SC02 / SC09
Check the complete model number. MW-SC01, MW-SC02 and MW-SC09 are listed; other Meowant models are not assumed to fit.
Flat liner: 18.5 × 12.6 inches
See fit photos & pack choices →Refill Bags for Petcove PurrTek
For the Petcove PurrTek system shown in the fit image. Not for Petcove Max. Other Max variants are not included in this fit claim.
Flat liner: 19.69 × 16.14 inches
See fit photos & pack choices →Refill Bags for Casa Leo Leo’s Loo / Loo Too
Check for Leo’s Loo or Leo’s Loo Too on the machine. Match the waste drawer shown in the fit guide; do not choose solely by a similar-looking tray.
See fit photos & pack choices →Refill Bags for Cumrige / Fumoi / Tuya Systems
Compatibility is listed at system/brand level. Compare your drawer with the 25.6 × 12.2-inch liner and the fit image; this is not a claim for every model sold under these names.
Flat liner: 25.6 × 12.2 inches
See fit photos & pack choices →Refill Bags for Fumoi Litter Systems
For the Fumoi drawer configuration shown in the image. Compare your drawer with the 25.6 × 12.2-inch liner; other Fumoi configurations are not assumed to fit.
Flat liner: 25.6 × 12.2 inches
See fit photos & pack choices →Drawstring Tray Liners — 36 × 19 inches
For conventional litter trays that suit a 36 × 19-inch liner. Measure your tray and allow material for the rim. A jumbo size label alone does not establish fit.
Flat liner: 36 × 19 inches
See fit photos & pack choices →Jumbo Drawstring Tray Liners — 39 × 22 inches
For conventional trays that suit a 39 × 22-inch liner. Measure your tray and allow enough material to fold over its rim; these are not machine-specific waste-drawer refills.
Flat liner: 39 × 22 inches
See fit photos & pack choices →Extra-Large Tray Liners — 46 × 19 inches
For conventional trays that suit a 46 × 19-inch liner. Measure the tray and allow for its rim. Extra-large does not mean a universal fit.
Flat liner: 46 × 19 inches
See fit photos & pack choices →Stazilix replacement bags are not manufactured by or affiliated with the machine brands named here.